Universal 3rd brake light camera for campers, vans & caravans

Features

We have developed universal 3rd brake light camera with built-in car camera system, which can be installed in any vehicle. The third brake light is equipped with high-resolution rear view camera systems and night vision functions. It is very easy to install. If you are replacing an existing third brake light, make sure the opening is no larger than 15 inches wide and 4 inches high to fit properly. If you install it on a vehicle without a third brake light, you can install it at will. This brake light camera comes with two gaskets - a rubber gasket that needs to be fitted onto the silicone gasket before it can be connected to a camper, caravan, camper or van

The third brake light with integrated reversing camera makes parking and reversing safer. The integrated camera provides a clear view of the area behind you, so you can see what's happening around you when parking, reversing and even on the road. Like all our products, it fits perfectly in your vehicle and offers a high quality product that increases safety for you and your passengers.

Optional installation of a universal 3rd brake light camera

We offer the installation of a universal brake light camera and other accessories. Our team of professionals can offer you a range of vehicle retrofit services. A fitting service is available for all vehicles and our specialists will install products that are well matched to your car to ensure night driving safety.

Our brake light camera is easy to install. We include a video connection cable that you can use to make the connection. Another connection option would be to connect via the cigarette lighter adapter without having to unplug a cable from your vehicle. If the reversing camera is connected according to the instructions, it will turn on automatically when you engage reverse gear. Manual activation is of course also specified in the instructions.

Easy installation / connection options:
- Connection option 1: You only need to connect one side of the long cable to the monitor. The other side is connected to the camera. Plus and minus is connected to the reversing light to supply the camera and monitor at the same time. You do not need to connect the monitor additionally, this is already included the power supply directly from behind the camera.
– Connection option 2: You can simply supply the camera and the monitor with power using the cigarette lighter and also switch the connection on and off using a switch without much effort (this is particularly suitable for someone who does not know how to connect the reversing light is approaching. NO CONNECTION IS NEEDED “Plug and Play”)

Technical details:
* Brand: HSRpro
* Reversing camera with Sony CCD chipset (2041+638)
* With 3M seal and rubber seal
* Image sensor size: 1/3″
* PAL/NTSC lens angle: 60°～170°
* Image sensor type: CCD
* Image sensor manufacturer: SONY JAPAN
* Effective Pixels PAL/NTSC: PAL: 795H×596 VNTSC: 811H×508V
* Horizontal resolution (TVL): 600
* Angle of lens: 170°
* Waterproof: IP68
* S/N ratio: ＞48dB
* Minimum illumination: 18(V/lux.sec)
* Night Vision Function: Yes
* Automatic white balance
* Power supply: 12V - 24V
* The brake light camera is compatible with the following car models: Mercedes Benz, Fiat, Ford, Peugeot, Citroen, Opel, Toyota, Nissan, Renault, VW, Iveco, Volkswagen, BMW, Audi, Abarth, AC, Acura, Aixam, Alfa Remeo, Alpina, Artega , Asia Motors, Aston Martin, Audi, Austin, Austin Healey, Baic, Bently, Borgward, Bugatti, Buick, Cadillac, Casalini, Caterham, Chatenet, Chrysler, Citroen, Cobra, Corvette, Cupra, Dacia, Deawoo, Daihatsu,Dtomaso, DFSK, Dodge, Donkervoort, DS Automobiles, Ferrari, Fisker, Gac Gonow, Gemballa, GMC, Grecav, Hamann, Honda, Holden, Hummer, Infiniti, Isuzu, Jaguar, Jeep, Kia, Koenigsegg, KTM, Lada, Land Rover, Landwind , Lexus, Ligier, Linsoln, Lotus, Mahindra, Maserati, Maybach, Mazda, Malaren, Mg, Microcar, Mini, Mitsubishi, Morgan, NSU, Oldmobile, Pagani, Piaggio, Plymonth, Polester, Pontiac, Polestar, Porsche, Proton, Rolls -Royce, Rover, Ruf, Saab, Santana, Seat, Skoda, Smart, SpeedART, Spyker, Ssangyong, Subaru, Suzuki, Talbot, Tata, Techart, Tesla, Trabant,Triumph, TVR, Volvo, Wartburg, Westfield, Wiesmann and electric cars (year of manufacture 1980 – 2022) with third brake light opening of maximum 15 cm width and maximum 4 cm height (Open area, ie the area behind your vehicle (3rd brake light position) through which all cables are routed.)
*CE: Yes
* E-brand: Yes

* Brand: HSRpro
* Monitor: 4,3 inch, 5 or 7 inch monitor
* System: PAL / NTSC system
* Resolution: 800(H)xRGBx 648(W)
* AV input: 2 video inputs
* Power supply: 12V - 24V

Question:
Up to how many rear view cameras can I connect to the monitor?
Answer:
Up to 2 reversing kemaras are possible

Paketinhalt:
1x 3rd brake light with integrated reversing camera and screw template (3M sticker)
1x 10 meter smart installation cable
1x power cable
1x power filter / stabilizer box
Optional package content:
1x color monitor set in 4,3 inches, 5 inches or 7 inches
1x cigarette lighter adapter
1x cigarette lighter adapter

A4 installation instructions in German
ElektroG WEEE number: DE 40436894

warranty condition..

Why buy from us:
– Reliability of our products (Buying a product is a simple thing, but what happens in the event of a defect or if the product even causes fire to your vehicle? Who then pays for this damage? Your car insurance certainly not, so don’t save at the wrong end!)
- We offer up to 5 years warranty on all our products. Please read our guarantee conditions or the one on the manufacturer's website > car rear view camera - POINT - de
– We are not just a supplier who buys and resells products. We manufacture some of our components ourselves and also put them together for our customers on request.
– We have electronic equipment repair service based in Hamburg, Germany.
– Our products have the CE
– Returns, repairs or warranty claims are processed directly in Hamburg, Germany. If this is claimed, the product does not have to be sent abroad in a complicated and expensive manner, which also means long waiting times and no high product safety
– You are welcome to visit us at our location in Hamburg, Germany with an appointment if you have a problem with a product and we will be happy to solve it for you.